We're sorry but your browser is not supported by Marsh.com.au

For the best experience, please upgrade to a supported browser:

X

Construction

Structural defects in high-rise construction

What is the role of insurance for owners, builders and designers / consultants?

There has been much recent commentary in the press regarding the potential impacts of the appearance of structural defects in completed high-rise buildings. 

What is a considered a structural defect?

A structural defect is defined as actual physical damage to the designated load-bearing elements of a structure, or the ingress of water into the waterproofing envelope, attributable to a defect in design, workmanship or materials, to the extent that the structure becomes unsafe or otherwise unlivable.

What is the potential impact?

With respect to insurance, the liability of the parties involved in a construction contract is dependent on a wide range of factors, including:

  • the form of contract entered into and the liabilities imposed under that contract
  • the timing of the appearance of the defect or damage
  • the cause of the structural defect
  • the consequences of the defect.

In addition to determining the party responsible for the consequences of any structural defect, these factors will determine the appropriate type of insurance policy to respond to financial consequences including the cost of repair of reinstatement of defective work; claims for loss of income, diminution of value or alternative accommodation expenses.

The scope of the particular policies themselves will determine whether a particular structural defect falls within the terms of the coverage, and whether any specific policy exclusions will operate.  

Professional Indemnity

Scope of Cover

  • Legal liability to third parties for claims for financial loss, first made against the Insured and notified to the Insurer during the policy period, where the claim arises from breach of professional duty (e.g. error in design or specification); or
  • Costs incurred prior to completion to mitigate a future claim, subject to prior notification to and agreement from the Insurer.

Timing of the appearance of the defect or damage

  • Damage would have to occur in the construction period or post-construction period; and the claim must be made against the Insured and notified to the Insurers during the period of insurance.

What does my professional indemnity policy cover in the event of a structural defect?

 

Insured

Not Insured

Defective materials

 

Defective workmanship

 

Defect in design, specification or other professional duty

 

What are the major uninsured exposures under professional indemnity insurance?

  • Liability arising from defective materials or defective workmanship
  • Claims brought outside the period of insurance
  • Excludes the Builder's own "first party" losses
Contract Works (Material Damage)

Scope of Cover

The cost of rectification of physical loss or damage to the works.

Timing of the appearance of the defect or damage

Damage would have to occur in the construction period or defects liability period from a cause on-site during the construction period.

What does my contract workspolicy cover in the event of a structural defect?

 

Insured

Not Insured

Rectification of damage

 

Rectification of defects (in the absence of damage)

 

Delay costs, indirect or consequential losses

 

What are the major uninsured exposures under Contract Works insurance?

  • Does not respond to rectification of defects in the absence of subsequent "damage" to the works
  • Excludes "improvements" in the original design, materials or workmanship, or the cost of rectification of defective parts of the works (dependent upon specific policy conditions)
  • Excludes damage occurring after the expiry of the defects liability
  • Excludes indirect or consequential losses.
Advance Consequential Loss

Scope of Cover

Consequential losses (such as loss of revenue or increased holding costs) incurred during the indemnity period as a result of delay in completion arising directly from damage (insured under the Contract Works policy) to the Works, occurring during the construction period.

Timing of the appearance of the defect or damage

Damage would have to occur in the construction period.

What does my Advance Consequential Loss policy cover in the event of a structural defect?

 

Insured

Not Insured

Rectification of damage

 

Rectification of defects (in the absence of damage)

 

Principal’s Delay costs

 

Builder’s liquidated damages

 

Third Party consequential losses

 

 

What are the major uninsured exposures under Advance Consequential Loss insurance?

  • Excludes consequential losses arising from damage occurring after the expiry of the construction period.
  • Excludes liability for third party consequential losses.
Inherent Defects Insurance

Scope of Cover

The building owner's cost of reinstatement of the completed Works damaged as a result of inherent defect in the structural works (foundations, columns, walls, floors, beams and other load bearing structures, stairs, internal pipes and the waterproofing envelope) which was undiscovered at practical completion (PC) following a technical audit, for a period of up to ten years after PC.

Coverage can be extended to cover loss of rent following insured damage.

Timing of the appearance of the defect or damage

Damage would have to occur in the post-construction period.

What does my Inherent Defects policy cover in the event of a structural defect?

 

Insured

Not Insured

Rectification of damage

 

Rectification of defects (in the absence of damage)

 

Third Party injury

 

Third Party property damage

 

Third Party consequential losses

 

 

What are the major uninsured exposures under Inherent Defects insurance?

  • Excludes defects in non-structural works, internal components, fixtures, fittings, mechanical and electrical services, and external works.
  • Insurers retain rights against the builder/design and construct contractor for defects during the defects liability period.
  • Damage caused by excluded perils (normally insured under operational property insurance policy).
  • Ingress of water during the first 12 months following PC.
Third Party (Public & Products) Liability

Scope of Cover

Legal liability to third parties for personal injury or property damage arising in connection with the Works or completed operations.

Timing of the appearance of the defect or damage

Damage would have to occur in the construction period or post-construction period

What does my Third Party (Public & Products ) Liability policy cover in the event of a structural defect?

 

Insured

Not Insured

Rectification of damage

 

Rectification of defects (in the absence of damage)

 

Third Party injury

 

Third Party property damage

 

Third Party consequential losses

 

What are the major uninsured exposures under Third Party (Public & Products) Liability insurance?

  • Excludes rectification of the Works themselves.
  • Excludes liability arising from a breach of professional duty (e.g. error in design or specification) unless third party personal injury or property damage arises therefrom.

 

What do you need to do?

It is imperative that developers, builders and designers / consultants ensure that a robust and effective insurance program is in place to protect against the catastrophic consequences of structural defects in building construction, and that all parties to the construction contract fully understand the policy terms and conditions and what insurance solutions are open to them.

Marsh Pty Ltd (ABN 86 004 651 512, AFSL 238983) arrange insurance and are not an insurer. Any statements concerning legal matters are based solely on our experience as insurance brokers and risk consultants and are not to be relied upon as legal advice, for which you should consult your own professional advisors. This document is not intended to be taken as advice regarding any individual situation and should not be relied upon as such. The information contained herein is based on sources we believe reliable, but we make no representation or warranty as to its accuracy.  Marsh shall have no obligation to update this publication and shall have no liability to you or any other party arising out of this publication or any matter contained herein. Marsh makes no representation or warranty concerning the application of policy wordings or the financial condition or solvency of insurers or re-insurers. Marsh makes no assurances regarding the availability, cost, or terms of insurance coverage.

Marsh Pty Ltd (ABN 86 004 651 512, AFSL 238983) (“Marsh”) arrange this insurance and is not the insurer. The Discretionary Trust Arrangement is issued by the Trustee, JLT Group Services Pty Ltd (ABN 26 004 485 214, AFSL 417964) (“JGS”). JGS is part of the Marsh group of companies. Any advice in relation to the Discretionary Trust Arrangement is provided by JLT Risk Solutions Pty Ltd (ABN 69 009 098 864, AFSL 226827) which is a related entity of Marsh. The cover provided by the Discretionary Trust Arrangement is subject to the Trustee’s discretion and/or the relevant policy terms, conditions and exclusions. This website contains general information, does not take into account your individual objectives, financial situation or needs and may not suit your personal circumstances. For full details of the terms, conditions and limitations of the covers and before making any decision about whether to acquire a product, refer to the specific policy wordings and/or Product Disclosure Statements available from JLT Risk Solutions on request. Full information can be found in the JLT Risk Solutions Financial Services Guide.